ICP Hot Surface Igniter for RGS120SRBB0AAA — OEM 1171306 with Wiring Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (HSI) is the direct-replacement ignition component for the ICP/Tempstar/Heil RGS120SRBB0AAA gas furnace. The igniter is energized at the start of each heat call and glows to roughly 2,000°F to ignite the burner gas. It is one of the most common furnace failure points — the brittle silicon-carbide or silicon-nitride element cracks from thermal cycling, contamination, or rough handling. When it fails, the furnace blower may run but produce no heat, the burners never light, or the control board locks out after several failed ignition attempts. This listing ships as OEM part number 1171306 (IGNITOR) and includes 1188370 (WIRING KIT IGNITER) so the harness pigtail and connector are replaced together for a clean, reliable install.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (igniter), 1188370 (wiring kit) |
| Type | Hot Surface Igniter (HSI) |
| Brand | ICP / Tempstar / Heil |
| Fits Model | RGS120SRBB0AAA |
| Voltage | 120V line-voltage HSI |
| Fitment | OEM direct replacement |
Compatibility
Engineered for the ICP Tempstar Heil RGS120SRBB0AAA gas furnace and shared across many ICP-family RGS-series single-stage gas furnaces that use this igniter platform. Always confirm your unit's igniter part number against 1171306 before ordering.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker, and shut off the gas supply. Verify zero voltage with a multimeter.
- Access — Remove the furnace burner/control access panel.
- Document — Photograph the igniter mounting position and wire routing before disconnecting.
- Remove — Unplug the igniter connector, remove the mounting screw, and carefully withdraw the old igniter without touching the element.
- Install — Mount the new igniter using only the ceramic base or wiring kit pigtail — never touch the glow element with bare fingers. Reconnect per your photo.
- Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light within one trial.
Signs You Need a Replacement
- Blower runs but burners never ignite and there is no heat.
- Furnace locks out on ignition failure after 3 retry attempts.
- Igniter shows a visible crack, blistering, or white powder on the element.
- Resistance reads open or far out of spec on a multimeter.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days