What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120SFBB0AAA — Includes Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120SFBB0AAA — Includes Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS120SFBB0AAA — Includes Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS120SFBB0AAA — Includes Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (part #1171306) lights the burners on the ICP/Tempstar/Heil RGS120SFBB0AAA gas furnace, and ships with the matching igniter wiring kit (part #1188370) for a clean, complete replacement. On each heat call, the control board sends voltage to the igniter, which glows red-hot and ignites the gas as the valve opens. Hot surface igniters are a wear item — the silicon nitride or carbide element becomes brittle with thermal cycling and eventually cracks, leaving you with no ignition and no heat. Including the wiring kit ensures the connector and harness are fresh, eliminating the brittle, heat-damaged leads that often fail alongside the element.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP
Application	Gas Furnace Ignition
Fitment	OEM Replacement

Compatibility

Direct OEM fit for the ICP/Tempstar/Heil RGS120SFBB0AAA gas furnace and related models that use the 1171306 igniter with the 1188370 wiring kit. Confirm your current igniter style and mounting bracket before installing.

Installation Guide

Safety First — Shut off gas and disconnect power, then verify zero voltage with a multimeter.
Access — Remove the furnace burner/service panel to reach the igniter.
Document — Photograph the igniter position and wiring connector before disconnecting.
Remove — Unplug the connector and remove the mounting screw; never touch the new element with bare fingers, as skin oils shorten its life.
Install — Mount the new igniter, install the fresh wiring kit, and route the harness away from sharp edges.
Test — Restore gas and power, start a heat call, and confirm the igniter glows and lights the burners promptly.

Signs You Need a Replacement

Furnace blower runs but no heat / no flame
Igniter no longer glows on a heat call
Visible crack or break in the element
Repeated ignition lockouts or short cycling

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS120SFBB0AAA — Includes Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120SFBB0AAA — Includes Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120SFBB0AAA — Includes Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu