What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120SEAA0AGAA — 120V Furnace Ignition Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120SEAA0AGAA — 120V Furnace Ignition Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS120SEAA0AGAA — 120V Furnace Ignition Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS120SEAA0AGAA — 120V Furnace Ignition Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 51.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit fits the ICP/Heil/Tempstar RGS120SEAA0AGAA gas furnace. The igniter (part 1171306) is the silicon-carbide element that glows red-hot on a call for heat to ignite the main burners; the included wiring kit (part 1188370) provides the correct OEM harness and connectors for a clean, reliable connection. Operating on 120V, the igniter is one of the most common furnace failure points because the element becomes brittle over thousands of heat cycles. When it cracks or burns out, the furnace draft inducer and gas valve sequence may run but the burners never light, leaving you with no heat. Replacing the igniter with a genuine OEM part restores dependable ignition without the early failures common to universal substitutes.

Specifications

Spec	Value
Part Number	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP (Heil / Tempstar / Comfortmaker)
Voltage	120V
Fitment	OEM
Application	Gas Furnace

Compatibility

Designed for the ICP/Heil/Tempstar RGS120SEAA0AGAA 120,000 BTU gas furnace and other RGS-series models using the same ignition assembly. Always confirm the OEM part number on your existing igniter and harness before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the furnace blower-compartment service panel.
Document — Photograph the igniter mounting and harness routing before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and carefully lift out the old igniter without touching the new element with bare fingers.
Install — Mount the new igniter, install the OEM wiring kit, and seat all connectors fully.
Test — Restore power and run a heat cycle, confirming the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace cycles to ignition but burners never light
Visible cracks, blisters, or white spots on the igniter element
Igniter no longer glows during a call for heat
Repeated ignition lockouts after 3 failed tries

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS120SEAA0AGAA — 120V Furnace Ignition Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120SEAA0AGAA — 120V Furnace Ignition Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120SEAA0AGAA — 120V Furnace Ignition Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu