What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120LECA0AAA — With Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120LECA0AAA — With Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS120LECA0AAA — With Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS120LECA0AAA — With Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 51.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit (igniter part 1171306 plus wiring kit 1188370) is the ignition component for the ICP / Tempstar / Heil RGS120LECA0AAA gas furnace. On every heat call, the furnace control board sends voltage to the igniter, which glows red-hot to ignite the gas as it flows from the burners. Because the igniter element is brittle and cycles to extreme temperatures hundreds of times per season, it is one of the most common wear items in a furnace. A cracked or worn igniter is the leading cause of "furnace blower runs but no heat" calls — the board attempts ignition, the igniter fails to glow, and the unit locks out on a failed-ignition fault. The included wiring kit ensures a clean, correct electrical connection for the replacement.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Application	Gas Furnace Ignition
Fitment	OEM

Compatibility

Direct-fit replacement for the ICP RGS120LECA0AAA and related Tempstar, Heil, and Comfortmaker furnaces using this hot surface ignition platform. Verify your furnace's igniter mounting and connector style before installing.

Installation Guide

Safety First — Shut off gas and disconnect furnace power, then verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter position and wiring before disconnecting.
Remove — Unplug the igniter harness and remove the mounting screw; handle the old igniter only by its ceramic base.
Install — Mount the new igniter (never touch the element with bare fingers) and connect using the supplied wiring kit.
Test — Restore gas and power, call for heat, and confirm the igniter glows and burners light.

Signs You Need a Replacement

Furnace blower runs but produces no heat
Igniter does not glow on a heat call
Visible cracks or fractures in the igniter element
Furnace locks out on repeated failed-ignition codes

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS120LECA0AAA — With Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120LECA0AAA — With Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120LECA0AAA — With Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu