What igniter fits my ICP furnace?

The correct replacement for ICP model RGS120LEAA0AGAA with Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS120LEAA0AGAA with Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS120LEAA0AGAA with Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS120LEAA0AGAA with Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 42.84 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part 1171306) ignites the burners on your ICP, Heil, and Tempstar RGS120LEAA0AGAA gas furnace. It is a line-voltage (120V) silicon-based element that glows red-hot on a heat call to light the main burner gas. When an igniter cracks, develops hairline fractures, or loses resistance, the furnace fails to light — producing no-heat calls, repeated lockouts, or a furnace that runs the inducer and waits but never fires. This listing includes the matching igniter wiring kit (part 1188370) so you can replace the harness and connector at the same time, which is the most common point of failure on aging igniters.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Voltage	120V line voltage
Fitment	OEM

Compatibility

Engineered for the ICP/Heil/Tempstar RGS120LEAA0AGAA furnace and other RGS120 series units that originally shipped with igniter 1171306. Always confirm your existing igniter part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter mounting and wiring before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw(s), and lift the old igniter out without touching the new element with bare fingers.
Install — Mount the new igniter, install the included wiring kit, and reconnect per your photo.
Test — Restore power and run a heat cycle; confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace runs the inducer and waits but never lights
Repeated ignition lockouts or hard lockout codes
Visible cracks, white spots, or a broken element
Igniter no longer glows on a heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS120LEAA0AGAA with Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS120LEAA0AGAA with Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS120LEAA0AGAA with Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu