ICP Hot Surface Igniter for RGS120HDBA0AAA Gas Furnace with Wiring Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part #1171306) is the ignition source for the ICP / Tempstar / Heil RGS120HDBA0AAA gas furnace. On every call for heat the furnace control board energizes the igniter, which glows to roughly 2,000°F and lights the gas at the burners. Because the igniter cycles on with every heating call, its silicon-nitride/silicon-carbide element is one of the most common wear items in a gas furnace. A cracked, eroded, or open igniter is the leading cause of "no heat" and short-cycle lockout faults. This listing includes the matching OEM igniter wiring kit (part #1188370) so the harness and connector are replaced together, eliminating the brittle, heat-baked leads that often fail alongside the element.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (igniter), 1188370 (wiring kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Voltage | 120 VAC |
| Application | Gas Furnace Ignition |
| Fits Model | RGS120HDBA0AAA |
Compatibility
Engineered for the ICP family RGS120HDBA0AAA gas furnace and shared across many ICP, Tempstar, Heil, Comfortmaker, and Arcoaire RGS-series furnaces using the same ignition system. Verify your existing igniter part number before ordering.
Installation Guide
- Safety First — Shut off gas and disconnect power at the furnace switch; verify zero voltage with a multimeter.
- Access — Remove the burner-compartment service panel.
- Document — Photograph the igniter leads and mounting position before disconnecting.
- Remove — Unplug the igniter connector, remove the mounting screw, and lift the old igniter out without touching the element.
- Install — Mount the new igniter, install the supplied wiring kit, and reconnect per your photo. Handle the element by the ceramic base only.
- Test — Restore gas and power, then run a heat cycle and confirm the igniter glows and the burners light.
Signs You Need a Replacement
- Furnace blows cold air or fails to ignite on a call for heat.
- Igniter does not glow, or glows weakly/unevenly.
- Visible cracks, chips, or white hot-spots on the element.
- Repeated ignition-failure lockouts (3-strike fault) on the control board.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days