ICP Hot Surface Igniter for RGS102SRCA0AAA — OEM Kit with Wiring Harness | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (HSI) is the ignition source for the ICP/Tempstar/Heil RGS102SRCA0AAA gas furnace. When the furnace calls for heat, the control board energizes the igniter, which glows white-hot to light the gas burners. This kit includes the igniter element (OEM 1171306) and the matched igniter wiring harness (OEM 1188370) so you can replace both the heating element and its often-brittle connector leads in a single repair. A failed igniter is one of the most common causes of no-heat calls — the silicon nitride/carbide element cracks from thermal cycling and stops glowing. Operating on the standard 120V furnace ignition circuit, this is a direct factory replacement.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (Igniter), 1188370 (Wiring Kit) |
| Type | Hot Surface Igniter (HSI) |
| Brand | ICP / Tempstar / Heil |
| Voltage | 120V |
| Fits Model | RGS102SRCA0AAA |
| Fitment | OEM Direct Replacement |
Compatibility
Designed as the factory ignition component for the ICP RGS102SRCA0AAA gas furnace and shared across many Tempstar, Heil, Comfortmaker, and Carrier-family RGS-series units using the same burner assembly. Always confirm your existing part number against 1171306 before ordering.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker; shut off the gas. Verify zero voltage with a multimeter.
- Access — Remove the furnace front service panels to expose the burner box.
- Document — Photograph the igniter mounting bracket and wire routing before disconnecting anything.
- Remove — Unplug the igniter harness, remove the mounting screw(s), and carefully withdraw the old igniter without touching the new element with bare fingers (skin oils shorten its life).
- Install — Mount the new igniter in the exact bracket position, install the new wiring kit, and reconnect per your photo.
- Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and the burners light promptly.
Signs You Need a Replacement
- Furnace blower runs but burners never light (no-heat).
- Igniter does not glow, or glows weakly/unevenly.
- Visible cracks, chips, or white powder on the igniter element.
- Furnace locks out after several failed ignition attempts.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days