What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102LSBA0AAA — With Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102LSBA0AAA — With Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS102LSBA0AAA — With Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS102LSBA0AAA — With Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 42.84 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit (OEM igniter #1171306 with wiring harness kit #1188370) is the component that lights the gas burners on your ICP RGS102LSBA0AAA furnace. On a call for heat, the control board sends 120V to the igniter, which glows white-hot to ignite the gas as the valve opens. Hot surface igniters are brittle silicon-carbide or silicon-nitride elements and are the most common no-heat failure in modern furnaces. Symptoms of a failing igniter include the furnace failing to light, short-cycling on ignition lockout, a visibly cracked or no-longer-glowing element, or a unit that runs the inducer and blower but never produces flame. The included wiring kit ensures a clean, correct electrical connection.

Specifications

Spec	Value
Igniter Part Number	1171306
Wiring Kit Part Number	1188370
Type	Hot Surface Igniter
Brand	ICP (Heil / Tempstar / Comfortmaker)
Voltage	120V
Fit	OEM Replacement

Compatibility

Directly fits the ICP/Heil/Tempstar RGS102LSBA0AAA gas furnace. This igniter and wiring kit combination is used across many ICP-family RGS and N-series gas furnaces — verify the igniter mounting bracket and connector against your existing part before installing.

Installation Guide

Safety First — Shut off gas and disconnect electrical power. Verify zero voltage at the igniter leads with a multimeter.
Access — Remove the furnace burner/service panel.
Document — Photograph the igniter position and harness routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw. Handle the old igniter by the ceramic base only.
Install — Mount the new igniter without touching the element, connect the wiring kit, and route the harness clear of hot surfaces.
Test — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and the burners light.

Signs You Need a Replacement

No heat — inducer and blower run but burners never ignite
Furnace locks out after several failed ignition attempts
Igniter element is cracked, chipped, or no longer glows
Visible hot spots or discoloration on the element

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS102LSBA0AAA — With Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102LSBA0AAA — With Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102LSBA0AAA — With Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu