What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102HSCA0AAA — OEM 1171306 Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102HSCA0AAA — OEM 1171306 Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS102HSCA0AAA — OEM 1171306 Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS102HSCA0AAA — OEM 1171306 Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 38.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) is the factory ignition component for the ICP / Tempstar / Heil RGS102HSCA0AAA gas furnace. The silicon-carbide igniter element heats glowing-hot when the control board calls for heat, lighting the burners on each cycle. This listing covers OEM igniter part number 1171306 and includes the matching wiring harness kit 1188370 for a clean, plug-and-play replacement. A failed igniter is the single most common cause of no-heat furnace calls: the brittle element cracks from thermal cycling, vibration, or age, and the furnace will lock out after several failed ignition attempts.

Specifications

Spec	Value
Part Number	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120V
Element	Silicon Carbide
Fitment	OEM

Compatibility

Engineered for the ICP-family RGS102HSCA0AAA gas furnace sold under the Tempstar, Heil, Comfortmaker and Day & Night badges. Always confirm your model and serial label before ordering.

Installation Guide

Safety First — Shut off gas and disconnect power at the furnace switch; verify zero voltage with a multimeter.
Access — Remove the lower burner-compartment service panel.
Document — Photograph the igniter bracket and wiring before disconnecting.
Remove — Unplug the igniter harness and unscrew the mounting bracket; handle the old element by the ceramic base only.
Install — Mount the new igniter without touching the silicon-carbide tip, then connect the new wiring kit per your photo.
Test — Restore gas and power and watch a full ignition cycle to confirm a clean light-off.

Signs You Need a Replacement

Furnace blower runs but burners never light
Visible crack, chip, or white spot on the igniter element
Furnace locks out after 3 ignition attempts (limit/ignition fault code)
Igniter glows weakly or not at all on a heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$38.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS102HSCA0AAA — OEM 1171306 Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102HSCA0AAA — OEM 1171306 Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102HSCA0AAA — OEM 1171306 Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu