What igniter fits my ICP furnace?

The correct replacement for ICP model RGS102HFAB0AAA Furnace – Silicon Nitride 120V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102HFAB0AAA Furnace – Silicon Nitride 120V | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS102HFAB0AAA Furnace – Silicon Nitride 120V | Ships Today

Name: ICP Hot Surface Igniter for RGS102HFAB0AAA Furnace – Silicon Nitride 120V | Ships Today
Brand: ICP
SKU: 1171306
Price: 41.60 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1171306) is the ignition source for the ICP/Heil/Tempstar RGS102HFAB0AAA gas furnace. When the thermostat calls for heat, the furnace control board sends 120V to this igniter, which glows red-hot and lights the burners. It ships complete with the OEM igniter wiring kit (part #1188370) for a clean, no-splice installation. Igniters are a high-wear part — repeated heating and cooling cycles eventually crack the element. A failed igniter is one of the most common causes of "no heat" calls: the inducer runs, the gas valve waits, but the burners never light and the furnace locks out.

Specifications

Spec	Value
Part Number	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Voltage	120V
Element	Silicon nitride
Fitment	OEM

Compatibility

Engineered as a direct fit for the ICP/Heil/Tempstar RGS102HFAB0AAA gas furnace and shared-platform ICP brand models (Comfortmaker, Arcoaire, Day & Night). Always confirm the part number on your existing igniter before ordering.

Installation Guide

Safety First – Shut off gas and disconnect power at the furnace switch; verify zero voltage with a multimeter.
Access – Remove the furnace burner/control access panel.
Document – Photograph the igniter bracket position and the wiring harness routing before disconnecting.
Remove – Unplug the igniter connector, remove the mounting screw, and lift out the old igniter. Handle the new element by the ceramic base only — skin oils shorten igniter life.
Install – Mount the new igniter, secure the bracket, and connect the supplied OEM wiring kit per your photo.
Test – Restore gas and power, start a heat cycle, and confirm the igniter glows and burners light within a few seconds.

Signs You Need a Replacement

Furnace inducer runs but burners never ignite (no heat)
Visible crack or break in the ceramic element
Igniter glows weakly or not at all during a call for heat
Furnace lights out and short-cycles or hard-locks on ignition fault codes

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$41.60

Frequently Asked Questions

Does this Igniter fit my ICP RGS102HFAB0AAA Furnace – Silicon Nitride 120V | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS102HFAB0AAA Furnace – Silicon Nitride 120V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS102HFAB0AAA Furnace – Silicon Nitride 120V | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu