What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101LTAA0AAAA — Silicon Nitride with Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101LTAA0AAAA — Silicon Nitride with Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS101LTAA0AAAA — Silicon Nitride with Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS101LTAA0AAAA — Silicon Nitride with Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 49.40 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) is the direct ignition component for the ICP / Tempstar / Heil RGS101LTAA0AAAA gas furnace. The igniter receives 120V from the control board at the start of each heat call and glows white-hot to ignite gas at the burners. This listing covers OEM part 1171306 (IGNITOR) and the matching 1188370 (WIRING KIT IGNITER), so you get both the igniter and the harness for a complete replacement. A cracked or contaminated igniter is the leading cause of no-heat lockouts: after several failed ignition attempts the control board locks the furnace out and the home goes cold.

Specifications

Spec	Value
OEM Part Number	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120V
Application	Gas furnace direct ignition
Fits Model	RGS101LTAA0AAAA

Compatibility

Engineered for the ICP-family RGS101LTAA0AAAA furnace and shared Tempstar, Heil, Comfortmaker, and Arcoaire platforms using the same burner assembly. Always confirm against your unit's nameplate before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter and shut off the gas.
Access — Remove the lower service panel to expose the burner assembly.
Document — Photograph the igniter bracket and wiring routing before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and lift out the old igniter without touching the ceramic element.
Install — Mount the new igniter, install the supplied wiring kit, and confirm correct gap and alignment to the burner.
Test — Restore gas and power, then watch a full ignition cycle to verify a steady glow and burner light-off.

Signs You Need a Replacement

Furnace locks out after 3 ignition attempts with no flame
Igniter does not glow or glows weakly
Visible cracks, chips, or white powder on the element
Intermittent no-heat that clears on a power reset

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$49.40

Frequently Asked Questions

Does this Igniter fit my ICP RGS101LTAA0AAAA — Silicon Nitride with Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101LTAA0AAAA — Silicon Nitride with Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101LTAA0AAAA — Silicon Nitride with Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu