What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101LFCB0AAA with Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101LFCB0AAA with Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS101LFCB0AAA with Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS101LFCB0AAA with Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 46.80 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1171306) is the ignition source for the ICP, Heil, and Tempstar RGS101LFCB0AAA gas furnace. When the thermostat calls for heat, the control board energizes the igniter, which heats to roughly 1,800-2,500°F to ignite the gas at the burners. This kit also includes the matching igniter wiring kit (part #1188370) so you have the correct harness and connector for a clean replacement. Hot surface igniters are brittle and degrade over thousands of heating cycles — common failure symptoms include no ignition, delayed ignition with a small “whoof,” short-cycling on the heat call, or a cracked/visibly damaged element.

Specifications

Spec	Value
Part Number	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Application	Gas furnace ignition
Fits Model	RGS101LFCB0AAA
Includes	Igniter + wiring harness kit

Compatibility

Designed for the ICP/Heil/Tempstar RGS101LFCB0AAA furnace and shared platform models that use the 1171306 igniter. Always confirm your model and part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter.
Access — Remove the furnace burner/service panel.
Document — Photograph the igniter mounting and wire routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and lift out the old igniter without touching the new element with bare fingers.
Install — Mount the new igniter, route and connect the included wiring kit per your photo.
Test — Restore power and run a full heat cycle to confirm reliable ignition.

Signs You Need a Replacement

Furnace blower runs but no flame ignites
Delayed ignition or a soft “boom” on startup
Cracked, chipped, or burnt-out igniter element
Repeated lockouts on the heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$46.80

Frequently Asked Questions

Does this Igniter fit my ICP RGS101LFCB0AAA with Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101LFCB0AAA with Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101LFCB0AAA with Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu