What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101LFAA0AAAA — Includes Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101LFAA0AAAA — Includes Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS101LFAA0AAAA — Includes Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS101LFAA0AAAA — Includes Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 54.60 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (part number 1171306) ships with the matching igniter wiring kit (part number 1188370) for the ICP/Heil/Tempstar RGS101LFAA0AAAA gas furnace. The igniter glows red-hot when energized to light the burners at the start of each heat cycle. Hot surface igniters are brittle and degrade over thousands of cycles; they crack, develop hairline fractures, or simply burn out. The included wiring kit replaces the harness and connector, eliminating intermittent no-light faults caused by corroded or loose terminals. Symptoms of a failed igniter include no heat, a furnace that locks out after several ignition attempts, or a glowing igniter that never lights the burners.

Specifications

Spec	Value
Part Number	1171306 (igniter)
Included Kit	1188370 (igniter wiring kit)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Function	Burner ignition
Fits Model	RGS101LFAA0AAAA

Compatibility

Direct OEM fit for the ICP RGS101LFAA0AAAA and shared ICP/Heil/Tempstar/Comfortmaker furnaces using igniter 1171306 with wiring kit 1188370. Confirm your existing igniter and connector style before installing.

Installation Guide

Safety First — Disconnect electrical power and verify zero voltage with a multimeter. Allow the igniter to cool fully.
Access — Remove the burner/service panel.
Document — Photograph the igniter position and wiring routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and carefully withdraw the old igniter without touching the ceramic element.
Install — Mount the new igniter handling it only by the ceramic base, install the new wiring kit harness, and route it clear of hot surfaces.
Test — Restore power, start a heat call, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

No heat and the furnace locks out after multiple ignition attempts
Igniter glows but burners fail to light
Visible cracks or breaks in the ceramic element
No glow at all during a heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$54.60

Frequently Asked Questions

Does this Igniter fit my ICP RGS101LFAA0AAAA — Includes Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101LFAA0AAAA — Includes Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101LFAA0AAAA — Includes Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu