ICP Hot Surface Igniter for RGS101HTAA0AAAA — 120V OEM Ignition Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part #1171306) is the ignition component for the ICP/Heil/Tempstar RGS101HTAA0AAAA gas furnace, supplied with the matching igniter wiring kit (#1188370). The igniter is energized by the control board at the start of each heating cycle, glowing to roughly 2,000°F to light the gas burners. A failed igniter is the single most common reason a furnace stops producing heat: it will crack, develop hot spots, or open completely after thousands of heating cycles. Symptoms include no ignition, a furnace that clicks and the inducer runs but no flame appears, or a unit that lockouts after several failed ignition attempts. The included wiring kit ensures a clean, OEM-spec electrical connection.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (igniter), 1188370 (wiring kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Heil / Tempstar |
| Voltage | 120V |
| Fitment | OEM |
Compatibility
Engineered for the ICP family RGS101HTAA0AAAA furnace and shared platform models across the Heil, Tempstar, and Comfortmaker brands. Always verify against your unit's part list before ordering.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker, verify zero voltage with a multimeter.
- Access — Remove the burner compartment service panel.
- Document — Photograph the igniter mounting and wiring before disconnecting.
- Remove — Unplug the igniter harness, remove the mounting screw, and carefully lift the old igniter out — handle only by the ceramic base, never the fragile element.
- Install — Seat the new igniter, secure the screw, and connect using the included wiring kit per your photo.
- Test — Restore power and run a heat cycle; confirm the igniter glows and burners light within seconds.
Signs You Need a Replacement
- No heat — inducer and gas valve cycle but burners never light
- Visible cracks, blisters, or white/grey spots on the igniter element
- Furnace locks out after 3 failed ignition attempts
- Igniter does not glow when energized at the start of the cycle
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days