What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101HSCB0AAA — 120V OEM Ignition Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101HSCB0AAA — 120V OEM Ignition Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS101HSCB0AAA — 120V OEM Ignition Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS101HSCB0AAA — 120V OEM Ignition Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 49.40 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1171306) is the ignition component for the ICP/Heil/Tempstar RGS101HSCB0AAA gas furnace, supplied with the matching igniter wiring kit (#1188370). At the start of each heat call the control board energizes the igniter, which glows to roughly 2,000°F to light the gas burners. The igniter is the most frequently replaced furnace part because it crack, develops hot spots, or opens electrically after thousands of cycles. Common symptoms are no heat with the inducer running, burners that fail to light, or a furnace that lockouts after several attempts. The included wiring kit provides a clean OEM-spec electrical connection for a reliable repair.

Specifications

Spec	Value
Part Numbers	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Voltage	120V
Fitment	OEM

Compatibility

Engineered for the ICP family RGS101HSCB0AAA furnace and shared-platform models across the Heil, Tempstar, and Comfortmaker brands. Verify against your unit's part list before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter mounting and wiring before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and lift the old igniter out by the ceramic base only — never touch the element.
Install — Seat the new igniter, secure the screw, and connect using the included wiring kit per your photo.
Test — Restore power and run a heat cycle; confirm the igniter glows and burners light within seconds.

Signs You Need a Replacement

No heat — inducer and gas valve cycle but burners never light
Visible cracks, blisters, or white/grey spots on the element
Furnace locks out after 3 failed ignition attempts
Igniter does not glow when energized

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$49.40

Frequently Asked Questions

Does this Igniter fit my ICP RGS101HSCB0AAA — 120V OEM Ignition Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101HSCB0AAA — 120V OEM Ignition Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101HSCB0AAA — 120V OEM Ignition Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu