ICP Hot Surface Igniter for RGS101HRBB0AAAA — Includes Igniter Wiring Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part #1171306) is the original ignition component for the ICP/Heil/Tempstar RGS101HRBB0AAAA gas furnace. The igniter glows red-hot when energized by the control board, providing the heat source that lights the main burners on each call for heat. This listing also includes the matching OEM igniter wiring kit (part #1188370) so you can replace cracked or brittle leads at the same time. A failed igniter is the single most common cause of furnace no-heat calls: the silicon nitride or silicon carbide element becomes brittle with age and thermal cycling, eventually cracking and breaking the circuit. Typical failure symptoms include the furnace running its ignition sequence but never lighting, the inducer and igniter cycling repeatedly, or a visible crack in the glow element.
Specifications
| Spec | Value |
|---|---|
| Igniter Part Number | 1171306 |
| Wiring Kit Part Number | 1188370 |
| Type | Hot Surface Igniter |
| Brand | ICP / Heil / Tempstar |
| Voltage | 120V |
| Application | Gas Furnace Ignition |
Compatibility
Engineered as a direct-fit OEM replacement for the ICP/Heil/Tempstar/Comfortmaker RGS101HRBB0AAAA furnace and the broader RGS101 platform that shares this ignition assembly. Always verify your model and serial tag before ordering to confirm fitment.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter before touching any component.
- Access — Remove the lower burner-compartment service panel.
- Document — Photograph the igniter bracket position and wire routing before disconnecting.
- Remove — Unplug the igniter harness, remove the mounting screw, and lift the old igniter out by the ceramic base only — never touch the glow element.
- Install — Seat the new igniter so the element sits in the burner flame path, secure the screw, and connect the new wiring kit per your photo.
- Test — Restore power, call for heat, and confirm the igniter glows and the burners light within the normal ignition window.
Signs You Need a Replacement
- Furnace runs the ignition sequence but burners never light
- Igniter shows no glow or a weak, partial glow
- Visible crack or chip in the ceramic glow element
- Repeated lockouts after several failed ignition attempts
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days