What igniter fits my ICP furnace?

The correct replacement for ICP model RGS101HEBA0AAAA — with Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS101HEBA0AAAA — with Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS101HEBA0AAAA — with Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS101HEBA0AAAA — with Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 48.04 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (P/N 1171306) and matching igniter wiring kit (P/N 1188370) fit the ICP / Tempstar / Heil RGS101HEBA0AAAA gas furnace. The hot surface igniter is the component that glows red-hot to ignite the burner gas at the start of every heating cycle. Powered by 120V from the furnace control board, it replaces the older standing-pilot ignition system with reliable, on-demand lighting. Igniters are brittle and degrade over thousands of heating cycles, eventually cracking or losing the ability to reach ignition temperature. The included wiring kit ensures a clean, corrosion-free connection between the igniter and the furnace harness.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Operating Voltage	120V
Brand	ICP / Tempstar / Heil
Includes	Igniter + Wiring Connector Kit
Fitment	OEM Replacement

Compatibility

Designed for the ICP RGS101HEBA0AAAA and compatible across ICP-built furnaces sold under Tempstar, Heil, Comfortmaker, and Arcoaire. Verify your existing igniter part number before ordering for an exact fit.

Installation Guide

Safety First — Disconnect power to the furnace and verify zero voltage with a multimeter; handle the igniter by its ceramic base only, never the silicon-carbide element.
Access — Remove the burner compartment access panel.
Document — Photograph the igniter mounting position and wiring routing before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and lift out the old igniter.
Install — Mount the new igniter without touching the element, then connect the new wiring kit per your photo.
Test — Restore power and run a heat cycle; confirm the igniter glows and the burners light within seconds.

Signs You Need a Replacement

Furnace clicks but burners never light (no glow)
Visible cracks, chips, or white scaling on the igniter element
Intermittent heating or repeated ignition lockouts
Igniter glows but fails to reach full ignition temperature

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$48.04

Frequently Asked Questions

Does this Igniter fit my ICP RGS101HEBA0AAAA — with Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS101HEBA0AAAA — with Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS101HEBA0AAAA — with Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu