ICP Hot Surface Igniter for RGS101HEAA0AAAA — OEM 1171306 with Wiring Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (HSI) is the direct-fit ignition component for the ICP/Heil/Tempstar RGS101HEAA0AAAA gas furnace. The igniter (OEM part 1171306) is a high-resistance silicon-carbide element that glows red-hot when energized to light the burner gas at each heating call. This listing ships with the matching wiring kit / igniter harness (OEM part 1188370) so the element and its connector are replaced together for a clean, lasting repair. A failed igniter is a leading cause of "no heat" — the inducer and blower may run and the gas valve may open, but without a glowing igniter the burners never light and the control board locks out after repeated failed trials.
Specifications
| Spec | Value |
|---|---|
| OEM Part Number | 1171306 (igniter) |
| Included Kit | 1188370 (wiring kit / igniter harness) |
| Type | Hot Surface Igniter |
| Brand | ICP / Heil / Tempstar / Comfortmaker |
| Element | Silicon carbide |
| Application | Gas furnace ignition |
| Fitment | OEM exact-fit |
Compatibility
Engineered for the ICP RGS101HEAA0AAAA gas furnace and shared-platform Heil, Tempstar, and Comfortmaker models that use the 1171306 igniter and 1188370 harness. Always confirm your model and part number on the unit rating plate before ordering.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker, shut off the gas, and verify zero voltage with a multimeter.
- Access — Remove the furnace burner-compartment service panel.
- Document — Photograph the igniter mounting and harness routing before disconnecting.
- Remove — Unplug the igniter connector, remove the mounting screw, and lift out the old igniter. Handle the new element by its ceramic base only — never touch the silicon-carbide tip.
- Install — Mount the new igniter, route and connect the new wiring kit per your photo, and confirm clearance from the burners.
- Test — Restore gas and power, call for heat, and verify the igniter glows and the burners light within the trial period.
Signs You Need a Replacement
- Furnace runs the inducer and blower but burners never light (no heat).
- Igniter does not glow, or glows weakly/unevenly.
- Visible cracks, chips, or white/blistered spots on the element.
- Control board flashing an ignition-failure or lockout code.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days