ICP Hot Surface Igniter for RGS091STCA0AAA — Furnace Ignitor with Wiring Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part #1171306) is the original-equipment ignition component for the ICP/Tempstar/Heil RGS091STCA0AAA gas furnace, supplied with the matching igniter wiring kit (#1188370). The igniter is a silicon-carbide or silicon-nitride element that glows red-hot when energized, lighting the burner gas during each heating cycle. It is one of the most common furnace failure points: the brittle element cracks from thermal cycling, contamination, or rough handling, and once it fails the furnace will not produce heat. Typical symptoms include no ignition, a furnace that cycles on the inducer and gas valve but never lights, a visibly cracked or broken igniter, or a unit that locks out after several failed ignition attempts.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (igniter), 1188370 (wiring kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Application | Gas furnace ignition |
| Fitment | OEM direct replacement |
| Includes | Igniter + wiring harness kit |
Compatibility
Engineered as the factory-correct igniter for the ICP/Tempstar/Heil model RGS091STCA0AAA and shared chassis variants in the same furnace family. Always confirm the part number on your existing igniter and bracket before ordering.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker, and verify zero voltage with a multimeter.
- Access — Remove the burner compartment service panel.
- Document — Photograph the igniter wiring and routing before disconnecting.
- Remove — Unplug the igniter connector, remove the mounting screw(s), and lift the old igniter out without touching the element.
- Install — Seat the new igniter in the bracket, handling it only by the ceramic base, install the wiring kit, and reconnect per your photo.
- Test — Restore power and run a heat cycle; confirm the igniter glows and the burners light promptly.
Signs You Need a Replacement
- Furnace runs the inducer and clicks the gas valve but never ignites
- Visibly cracked, chipped, or broken igniter element
- No glow when the igniter should energize
- Repeated ignition lockouts after several attempts
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days