What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091SRCB0AAA — With Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091SRCB0AAA — With Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS091SRCB0AAA — With Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS091SRCB0AAA — With Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit (part 1171306) with matching wiring harness (part 1188370) fits the ICP / Tempstar / Heil RGS091SRCB0AAA gas furnace. The hot surface igniter is the component that glows red-hot on a heat call to ignite the burner gas. Powered by 120 volts, it draws current, heats to ignition temperature within seconds, and the control board confirms ignition through the flame sensor. Igniters are a wear item — repeated heating and cooling cycles eventually crack or weaken the element. The included wiring kit replaces the original pigtail connector, which is the second most common failure point because heat-stressed connectors corrode and lose continuity. Replacing both together restores reliable ignition.

Specifications

Spec	Value
Part Numbers	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP
Voltage	120V
Includes	Igniter and wiring harness kit
Fit	OEM Replacement

Compatibility

Designed for the ICP RGS091SRCB0AAA and shared across Tempstar, Heil, Comfortmaker, and other ICP-family furnaces using this igniter platform. Always confirm the connector style matches; the supplied wiring kit covers the standard plug used on this furnace series.

Installation Guide

Safety First — Shut off gas and disconnect electrical power; verify zero voltage with a multimeter.
Access — Remove the furnace burner compartment door.
Document — Photograph the igniter bracket position and wire routing before removal.
Remove — Unplug the igniter connector and remove the mounting screw; lift the brittle element out carefully without touching the glow surface.
Install — Mount the new igniter handling it only by the ceramic base, install the new wiring harness, and route wires clear of the burner flame path.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

No heat — the furnace runs the inducer but burners never light.
Igniter does not glow, or glows weakly.
Visible crack or break in the igniter element.
Short cycling on ignition lockout after several failed attempts.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS0...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS091SRCB0AAA — With Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091SRCB0AAA — With Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091SRCB0AAA — With Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu