What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091SRBA0AAAA — OEM Igniter & Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091SRBA0AAAA — OEM Igniter & Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS091SRBA0AAAA — OEM Igniter & Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS091SRBA0AAAA — OEM Igniter & Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine ICP hot surface igniter kit includes the igniter (part 1171306) and matching wiring harness kit (part 1188370) for the RGS091SRBA0AAAA gas furnace. On each heat call the control board sends 120V to the igniter, which glows red-hot to light the burners. Hot surface igniters are fragile and degrade with every cycle — they crack, develop hairline fractures, or burn out entirely, leaving the furnace unable to light. The included wiring kit ensures a clean, corrosion-free connection. Replacing the igniter at the first sign of failure restores reliable ignition and prevents no-heat calls.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Operating Voltage	120V
Brand	ICP / Tempstar / Heil
Fitment	OEM Direct Replacement

Compatibility

Designed for the ICP Tempstar Heil RGS091SRBA0AAAA gas furnace and other RGS-series models using a 120V hot surface igniter. Confirm igniter mounting and connector style before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring before disconnecting.
Remove — Unplug the igniter harness and remove the mounting screw; handle the old igniter by its ceramic base only.
Install — Mount the new igniter without touching the element, then connect the new wiring kit.
Test — Restore power, start a heat cycle, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace blower runs but burners never ignite
Visible cracks or breaks in the igniter element
Igniter no longer glows or glows weakly
Repeated ignition lockouts on the control board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee. Never touch the igniter element with bare hands — skin oils shorten its life.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS0...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS091SRBA0AAAA — OEM Igniter & Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091SRBA0AAAA — OEM Igniter & Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091SRBA0AAAA — OEM Igniter & Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu