ICP Hot Surface Igniter for RGS091SFBA0AAAA — Silicon Nitride Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This is the genuine OEM hot surface igniter (HSI) for the ICP / Heil / Tempstar RGS091SFBA0AAAA gas furnace, supplied as OEM part number 1171306 and bundled with the matching igniter wiring kit, OEM part 1188370. The igniter is the ignition source for the main burners: on a call for heat, the furnace control board energizes the igniter, it glows white-hot, and the gas valve opens so the burners light. Because the element runs through repeated heat-up/cool-down cycles, it is one of the most common no-heat failure points on this furnace. Typical failure symptoms include a furnace that runs the inducer and blower but never lights, a cracked or visibly broken ceramic element, no glow during the ignition sequence, or a unit that locks out after three failed ignition attempts.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (igniter), 1188370 (wiring kit) |
| Type | Hot Surface Igniter (HSI) |
| Brand | ICP / Heil / Tempstar |
| Voltage | 120V |
| Fits Model | RGS091SFBA0AAAA |
| Fitment | OEM direct replacement |
Compatibility
This igniter and wiring kit are a factory-direct fit for the ICP/Heil/Tempstar/Comfortmaker RGS091SFBA0AAAA furnace. The same OEM part is shared across many ICP-built single- and two-stage gas furnaces of this vintage. Always confirm your unit's model and serial tag before ordering.
Installation Guide
- Safety First — Disconnect electrical power at the furnace switch and breaker, and shut off the gas. Verify zero voltage with a multimeter.
- Access — Remove the furnace burner-compartment service panel.
- Document — Photograph the igniter mounting and wire routing before disconnecting anything.
- Remove — Unplug the igniter connector, remove the mounting screw(s), and carefully withdraw the old igniter without touching the ceramic. Handle the new element by the bracket only — skin oils shorten igniter life.
- Install — Mount the new igniter at the correct depth over the burner, install the wiring kit, and reconnect per your photo.
- Test — Restore gas and power, then run a heat cycle and confirm the igniter glows and the burners light cleanly.
Signs You Need a Replacement
- Furnace inducer and blower run but the burners never ignite.
- Cracked, chipped, or broken ceramic element.
- No visible glow during the ignition sequence.
- Furnace locks out after three failed ignition attempts.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days