What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091LSAA0AAAA — OEM Ignitor + Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091LSAA0AAAA — OEM Ignitor + Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS091LSAA0AAAA — OEM Ignitor + Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS091LSAA0AAAA — OEM Ignitor + Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 51.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM hot surface igniter assembly for the ICP / Tempstar / Heil RGS091LSAA0AAAA gas furnace. The hot surface igniter (HSI) is the component that glows red-hot at the start of every heat cycle to ignite the gas burners. Over time, repeated thermal cycling causes the silicon carbide or silicon nitride element to crack, weaken, or fail outright — the most common reason a furnace will run its inducer and gas valve sequence but never light. This package includes the OEM ignitor (part 1171306) and the matching igniter wiring kit (part 1188370) so the connector and harness are replaced together for a clean, reliable installation.

Specifications

Spec	Value
Part Number	1171306 (Ignitor), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Application	Gas Furnace
Fitment	OEM Replacement

Compatibility

Engineered as a direct-fit replacement for the ICP RGS091LSAA0AAAA furnace and the family of ICP, Tempstar, Heil, Comfortmaker, and Arcoaire furnaces that share this OEM ignitor and wiring kit. Always confirm your existing part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and shut off the gas. Verify zero voltage with a multimeter.
Access — Remove the furnace burner/service panel.
Document — Photograph the igniter mounting and wire routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw(s), and lift the old igniter out without touching the element. Replace the harness with the included wiring kit.
Install — Mount the new igniter, handling only by the ceramic base, and reconnect the harness per your photo.
Test — Restore power and gas, then run a heat cycle and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace runs the inducer and clicks but burners never ignite
No visible glow at the igniter during the ignition sequence
Visible cracks, chips, or white/blistered spots on the element
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS0...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS091LSAA0AAAA — OEM Ignitor + Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091LSAA0AAAA — OEM Ignitor + Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091LSAA0AAAA — OEM Ignitor + Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu