What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091HTAB0AAAA — With Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091HTAB0AAAA — With Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS091HTAB0AAAA — With Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS091HTAB0AAAA — With Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM hot surface igniter for the ICP/Tempstar/Heil RGS091HTAB0AAAA gas furnace (OEM 1171306), with a matching igniter wiring kit also available (OEM 1188370). The hot surface igniter is the component that glows red-hot on a call for heat to ignite the gas at the burners. When the control board energizes the igniter, it draws line voltage and heats within seconds; once the flame sensor confirms ignition, the igniter de-energizes. Igniters are fragile and wear out over thousands of heat cycles — the silicon nitride or carbide element develops hairline cracks, hot spots, or breaks entirely, leaving the furnace unable to light. The included wiring kit replaces brittle or heat-damaged igniter leads and connectors so you get a clean, reliable connection.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120V
Application	Gas Furnace Ignition
Fitment	OEM

Compatibility

Fits the ICP RGS091HTAB0AAAA and its Tempstar, Heil, and Comfortmaker furnace equivalents. Confirm the igniter mounting style and connector against your existing part before ordering.

Installation Guide

Safety First — Shut off gas and disconnect electrical power; verify zero voltage with a multimeter.
Access — Remove the furnace burner compartment door.
Document — Photograph the igniter mounting and wire routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw. Handle the new igniter only by its ceramic base — never touch the element.
Install — Mount the new igniter, install the wiring kit if needed, and reconnect per your photo.
Test — Restore gas and power, call for heat, and watch for a clean glow and burner ignition.

Signs You Need a Replacement

Furnace blower runs but the burners never light
No visible glow during the ignition sequence
Visible crack or break in the igniter element
Repeated ignition lockouts after the inducer and gas valve cycle

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS0...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS091HTAB0AAAA — With Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091HTAB0AAAA — With Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091HTAB0AAAA — With Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu