What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091HSAB0AAAA — OEM Kit with Wiring | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091HSAB0AAAA — OEM Kit with Wiring | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS091HSAB0AAAA — OEM Kit with Wiring | Ships Today

Name: ICP Hot Surface Igniter for RGS091HSAB0AAAA — OEM Kit with Wiring | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part 1171306) with companion wiring kit (part 1188370) is the ignition source for the ICP / Heil / Tempstar RGS091HSAB0AAAA gas furnace. On a call for heat, the control board sends voltage to the igniter, which glows red-hot to light the gas at the burners. Igniters are brittle and have a finite lifespan — the silicon nitride or carbide element degrades with every heating cycle and eventually cracks or fails to reach ignition temperature. When it fails, the furnace blower may run but produce no heat, or the unit may lock out after several failed ignition attempts. The included wiring kit ensures a clean, factory-spec electrical connection to the new element.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP (Heil / Tempstar)
Includes	Igniter element + wiring harness kit
Fits Model	RGS091HSAB0AAAA
Fitment	OEM direct replacement

Compatibility

Direct OEM replacement for the RGS091HSAB0AAAA and compatible ICP, Heil, Tempstar, and Comfortmaker gas furnaces using this hot surface ignition system. Confirm the part number on your existing igniter before ordering.

Installation Guide

Safety First — Disconnect electrical power and shut off the gas. Verify zero voltage with a multimeter.
Access — Remove the furnace burner compartment service panel.
Document — Photograph the igniter position and wiring connection before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and lift out the old igniter. Handle the new element by its ceramic base only — never touch the glow element.
Install — Mount the new igniter, connect the wiring kit, and route the harness clear of hot surfaces.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace blower runs but produces no heat
Igniter does not glow on a call for heat
Furnace locks out after repeated failed ignition attempts
Visible cracks or breaks in the igniter element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS0...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS091HSAB0AAAA — OEM Kit with Wiring | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091HSAB0AAAA — OEM Kit with Wiring | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091HSAB0AAAA — OEM Kit with Wiring | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu