ICP Hot Surface Igniter for RGS091HRCB0AAA — 120V Silicon Nitride with Wiring Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part #1171306) is the ignition source for your ICP Tempstar Heil RGS091HRCB0AAA gas furnace. Operating on 120V, the silicon-nitride element glows red-hot to light the burners on each call for heat. This listing includes the matching igniter wiring kit (#1188370) so you can replace the harness and ceramic connector at the same time — a common point of failure when the original wires become brittle from repeated heat cycling. A failed igniter is the single most common cause of no-heat furnace calls. Because the element is fragile and degrades with every ignition cycle, replacing it on schedule prevents mid-winter breakdowns.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (igniter), 1188370 (wiring kit) |
| Type | Hot Surface Igniter |
| Element | Silicon Nitride |
| Brand | ICP / Tempstar / Heil |
| Voltage | 120V |
| Fitment | OEM Replacement |
Compatibility
Engineered for the ICP family RGS091HRCB0AAA gas furnace and shared ICP, Tempstar, Heil, and Comfortmaker platforms using the same ignition module. Always confirm against your existing part number before ordering.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
- Access — Remove the burner compartment service panel.
- Document — Photograph the igniter bracket position and wire routing before disconnecting.
- Remove — Unplug the igniter connector, remove the mounting screw, and carefully withdraw the old igniter without touching the ceramic. Cut in the new wiring kit if the harness is degraded.
- Install — Mount the new igniter, handling it only by the ceramic base, and reconnect the harness per your photo.
- Test — Restore power and observe a full ignition cycle to confirm the element glows and the burners light.
Signs You Need a Replacement
- Furnace blower runs but no heat is produced
- Igniter shows visible cracks, blisters, or no glow
- Repeated ignition lockouts or short cycling
- Ohmmeter reads open or out-of-spec resistance across the element
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days