ICP Hot Surface Igniter for RGS091HFBA0AAAA — OEM 1171306 with Wiring Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part number 1171306) is the factory ignition component for the ICP/Tempstar/Heil RGS091HFBA0AAAA gas furnace. The igniter glows red-hot when energized at 120V to ignite the burner gas at the start of each heating cycle. This listing also includes the matching igniter wiring kit (1188370) so you can replace brittle, heat-damaged leads at the same time. Hot surface igniters are one of the most common furnace failure points — the silicon-carbide or silicon-nitride element becomes brittle with thermal cycling and eventually cracks. Typical failure symptoms include no ignition, a furnace that clicks and tries to light but never fires, the blower running with cold air, or visible cracks/white spots on the igniter element.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (Igniter), 1188370 (Wiring Kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Voltage | 120V |
| Application | Gas Furnace Ignition |
| Fit | OEM Direct Replacement |
Compatibility
Engineered as a direct OEM fit for the ICP/Tempstar/Heil RGS091HFBA0AAAA gas furnace. Always confirm your model and serial tag before ordering, and verify the existing igniter part number when possible.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter and shut off the gas supply.
- Access — Remove the burner compartment service panel.
- Document — Photograph the igniter mounting and wiring connector before disconnecting.
- Remove — Unplug the igniter harness, remove the mounting screw(s), and carefully withdraw the old igniter without touching the element with bare fingers.
- Install — Mount the new igniter in the same orientation, install the new wiring kit, and reconnect per your photo. Handle the element by the ceramic base only.
- Test — Restore gas and power and watch a full ignition cycle to confirm the igniter glows and the burner lights.
Signs You Need a Replacement
- Furnace fails to ignite or locks out on ignition failure.
- Igniter does not glow or glows weakly/unevenly.
- Visible cracks, white spots, or pitting on the element.
- Intermittent no-heat calls, especially on cold mornings.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days