What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091HEBB0AAAA — OEM with Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091HEBB0AAAA — OEM with Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS091HEBB0AAAA — OEM with Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS091HEBB0AAAA — OEM with Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 42.84 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (part 1171306), available with its matching igniter wiring kit (part 1188370), fits the ICP Tempstar/Heil RGS091HEBB0AAAA gas furnace. The igniter glows red-hot on each heat call to ignite the burners. Hot surface igniters are brittle and degrade with every ignition cycle — the element develops hairline cracks and finally fails open, leaving the furnace with no flame. Because the element is fragile, OEM fitment and careful handling are critical to a lasting repair. The included wiring kit ensures clean, correct connections to the control board.

Specifications

Spec	Value
Part Number	1171306 (Igniter) / 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Application	Gas Furnace Burner Ignition
Fitment	OEM Direct Replacement

Compatibility

Designed for the ICP / Tempstar / Heil RGS091HEBB0AAAA and related RGS091 furnaces that use the same ignition system. Confirm your model and serial number before ordering.

Installation Guide

Safety First — Turn off gas and disconnect power. Verify zero voltage with a multimeter before working near the burner.
Access — Remove the furnace burner/service panel to reach the igniter.
Document — Photograph the igniter mounting and wiring routing before disconnecting.
Remove — Unplug the igniter harness and remove the mounting screw. Handle only by the ceramic base — never touch the silicon element.
Install — Mount the new igniter, install the wiring kit, and reconnect the harness, keeping the element clear of metal surfaces.
Test — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace clicks/calls for heat but never ignites
Igniter does not glow during the ignition sequence
Visible cracks, blistering, or breakage on the element
Intermittent no-heat lockouts after several cycles

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS0...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS091HEBB0AAAA — OEM with Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091HEBB0AAAA — OEM with Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091HEBB0AAAA — OEM with Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu