ICP Hot Surface Igniter for RGS091HEAB0AAAA — Silicon Nitride + Wiring Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part #1171306) is the direct-fit ignition component for the ICP / Tempstar / Heil RGS091HEAB0AAAA gas furnace. The igniter glows red-hot on a call for heat to ignite the gas at the burner, and it is one of the most common furnace failure points. This listing also includes the matching igniter wiring kit (part #1188370) so you can replace the connector and pigtail in the same service call. Typical failure symptoms include no ignition, a furnace that clicks but never lights, short cycling on the ignition sequence, or a visible crack in the igniter element. Hot surface igniters are brittle and fail from normal thermal cycling, soot buildup, or being touched during prior service.
Specifications
| Spec | Value |
|---|---|
| Igniter Part Number | 1171306 |
| Wiring Kit Part Number | 1188370 |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Application | Gas Furnace Ignition |
| Fit | OEM Direct Replacement |
Compatibility
Engineered for the ICP family RGS091HEAB0AAAA furnace and shared chassis models sold under the Tempstar, Heil, Comfortmaker, and Day & Night labels. Always confirm your existing igniter part number before ordering.
Installation Guide
- Safety First — Disconnect power at the furnace switch or breaker and verify zero voltage with a multimeter. Shut off the gas supply.
- Access — Remove the burner compartment service panel.
- Document — Photograph the igniter bracket and wiring before disconnecting.
- Remove — Unplug the igniter connector, remove the mounting screw, and carefully withdraw the old igniter without touching the element.
- Install — Mount the new igniter, install the wiring kit pigtail, and reconnect per your photo. Handle the element by the ceramic base only.
- Test — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and lights the burners.
Signs You Need a Replacement
- Furnace will not ignite or produces no heat
- Igniter no longer glows orange/red during the call for heat
- Visible crack, chip, or blistering on the igniter element
- Repeated lockouts after several failed ignition attempts
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days