What igniter fits my ICP furnace?

The correct replacement for ICP model RGS091HDAB0AAAA — With Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091HDAB0AAAA — With Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS091HDAB0AAAA — With Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS091HDAB0AAAA — With Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 50.64 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter fits the ICP / Tempstar / Heil RGS091HDAB0AAAA gas furnace. The igniter is the component that glows red-hot at the start of every heat cycle to light the burners. On a call for heat, the control board sends line voltage to the igniter; once it reaches ignition temperature, the gas valve opens and the burners light. This listing covers OEM igniter 1171306 and the matching OEM wiring kit 1188370, so you receive both the heating element and the harness needed for a clean, reliable replacement. Hot surface igniters are brittle and wear out over time — they crack from thermal cycling or develop hairline fractures that prevent them from reaching ignition temperature, leaving the furnace unable to light.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Includes	Igniter + Wiring Harness Kit
Application	Gas Furnace Ignition
Fits Model	RGS091HDAB0AAAA

Compatibility

Built for the ICP RGS091HDAB0AAAA furnace and compatible Tempstar, Heil, and Comfortmaker models that use this hot surface igniter assembly. Verify the igniter mounting and connector style against your original before installing.

Installation Guide

Safety First — Shut off gas and disconnect power; verify zero voltage with a multimeter.
Access — Remove the furnace burner compartment door.
Document — Photograph the igniter mounting bracket and wire routing before disconnecting.
Remove — Unplug the igniter harness, unscrew the bracket, and lift out the cracked igniter without touching the element.
Install — Mount the new igniter (handle by the ceramic base only), then connect the new wiring kit per your photo.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Igniter no longer glows on a heat call
Visible cracks or chips in the ceramic element
Furnace clicks and tries to light but never ignites
Repeated short-cycling on ignition lockout

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS0...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS091HDAB0AAAA — With Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS091HDAB0AAAA — With Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS091HDAB0AAAA — With Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu