What igniter fits my ICP furnace?

The correct replacement for ICP model RGS090STAA0AGAA — Tempstar/Heil Furnace | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS090STAA0AGAA — Tempstar/Heil Furnace | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS090STAA0AGAA — Tempstar/Heil Furnace | Ships Today

Name: ICP Hot Surface Igniter for RGS090STAA0AGAA — Tempstar/Heil Furnace | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1171306) is the ignition source for the ICP / Tempstar / Heil RGS090STAA0AGAA 90,000 BTU gas furnace. On each call for heat the furnace control board energizes the igniter, which glows to roughly 2,000°F and lights the burner gas. This listing ships with the matching igniter wiring kit (part #1188370) so you have the harness and connector needed for a clean, code-correct replacement. A cracked element or open circuit is one of the most common no-heat failures on this furnace — symptoms include the igniter never glowing, glowing but the burners failing to light, or the furnace locking out after several ignition retries.

Specifications

Spec	Value
Part Number	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Fits Model	RGS090STAA0AGAA
Application	Gas furnace ignition
Includes	Igniter + wiring kit

Compatibility

Direct-fit OEM replacement for the ICP/Tempstar/Heil RGS090STAA0AGAA gas furnace. The 1171306 igniter and 1188370 wiring kit are also used across many ICP-family RGS, NGS and comparable induced-draft furnace platforms — match your old part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, and verify zero voltage with a multimeter.
Access — Remove the furnace blower/burner service panel.
Document — Photograph the igniter mounting and wiring routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and lift the old igniter out without touching the silicon-nitride element with bare fingers.
Install — Mount the new igniter, install the wiring kit, and reconnect the harness per your photo.
Test — Restore power and cycle a call for heat; confirm the igniter glows and the burners light within the trial-for-ignition window.

Signs You Need a Replacement

Igniter never glows on a call for heat.
Visible crack or hot spot in the element.
Furnace ignites then locks out, or short-cycles on ignition failure.
Cold air from registers with the blower running but no flame.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS0...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS090STAA0AGAA — Tempstar/Heil Furnace | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS090STAA0AGAA — Tempstar/Heil Furnace | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS090STAA0AGAA — Tempstar/Heil Furnace | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu