ICP Hot Surface Igniter for RGS090STAA0AAA — Furnace Ignition Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part #1171306) and matching igniter wiring kit (part #1188370) ignite the burners on your ICP / Tempstar / Heil RGS090STAA0AAA gas furnace. On each call for heat the integrated control energizes the igniter, which glows red-hot to light the burner gas. Igniters are the single most common furnace failure point — the silicon-carbide or silicon-nitride element grows brittle with every heat cycle and eventually cracks. Typical failure symptoms include a furnace that hums and clicks but never lights, a glowing igniter that produces no flame, repeated lockouts after three ignition attempts, or no glow at all. Installing the included wiring kit at the same time prevents heat-damaged connectors from causing intermittent no-heat calls.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 (Igniter), 1188370 (Wiring Kit) |
| Type | Hot Surface Igniter |
| Brand | ICP / Tempstar / Heil |
| Voltage | 120V |
| Fitment | OEM Replacement |
| Includes | Igniter + Wiring Harness Kit |
Compatibility
Engineered for the ICP / Tempstar / Heil / Comfortmaker RGS090STAA0AAA 90,000 BTU gas furnace. The RGS-series and many related ICP-family gas furnaces share this igniter platform — match your OEM part number 1171306 to confirm fit before ordering.
Installation Guide
- Safety First — Shut off the gas and disconnect electrical power at the service switch and breaker. Verify zero voltage with a multimeter.
- Access — Remove the furnace burner-compartment service panel.
- Document — Photograph the igniter bracket and wiring connector before disconnecting.
- Remove — Unplug the igniter harness, remove the mounting screw, and carefully withdraw the old igniter without touching the element. Replace the harness with the included wiring kit.
- Install — Mount the new igniter, handling it only by the ceramic base, and reconnect the harness per your photo.
- Test — Restore gas and power, then run a heat cycle to confirm the igniter glows and the burners light cleanly.
Signs You Need a Replacement
- Furnace clicks and attempts ignition but never lights
- Igniter glows but burners fail to ignite, or no glow at all
- Furnace locks out after three trial-for-ignition attempts
- Visible cracks or white spots on the igniter element
Shipping & Returns
Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days