What igniter fits my ICP furnace?

The correct replacement for ICP model RGS303LFEA0AAAA — OEM 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS303LFEA0AAAA — OEM 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS303LFEA0AAAA — OEM 1179966 | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS303LFEA0AAAA — OEM 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 50.70 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM igniter electrode (part number 1179966) for the ICP/Tempstar/Heil RGS303LFEA0AAAA gas furnace. The igniter electrode glows or sparks to light the burners at the start of every heat cycle. It is a wear item — repeated heating and cooling makes the element brittle until it cracks or fails to reach ignition temperature. When the igniter goes bad, the furnace draws the inducer and opens the gas valve but the burners never light, producing a no-heat call and often a hard lockout after several failed attempts. A fresh OEM igniter restores fast, reliable ignition.

Specifications

Spec	Value
Part Number	1179966
Type	Hot Surface Igniter / Ignitor Electrode
Brand	ICP (Tempstar / Heil / Comfortmaker)
Fits Model	RGS303LFEA0AAAA
Fit	OEM Replacement
Application	Gas Furnace

Compatibility

Designed as a direct OEM fit for the ICP/Tempstar/Heil RGS303LFEA0AAAA gas furnace. ICP-family brands (Heil, Tempstar, Comfortmaker, Arcoaire, KeepRite) share igniters across the RGS series, so this electrode may also fit related models. Confirm the existing igniter part number (1179966) before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel to reach the igniter.
Document — Photograph the igniter position and wiring before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw(s), and withdraw the old element — handle only by the ceramic base, never the fragile element.
Install — Mount the new 1179966 igniter in the same orientation and reconnect the harness; do not touch the element surface with bare fingers.
Test — Restore power, start a heat call, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace cycles the inducer and gas valve but the burners never ignite.
Repeated ignition lockouts after several failed attempts.
Visible cracks, breaks, or white blistering on the igniter element.
No glow from the igniter during the ignition sequence.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP RGS303LFEA0AAAA — OEM 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS303LFEA0AAAA — OEM 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS303LFEA0AAAA — OEM 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu