What igniter fits my ICP furnace?

The correct replacement for ICP model RGS303HDFA0AAAA — OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS303HDFA0AAAA — OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS303HDFA0AAAA — OEM | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS303HDFA0AAAA — OEM | Ships Today
Brand: ICP
SKU: 1179966
Price: 46.80 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM igniter electrode (part 1179966) lights the burners on your ICP / Tempstar / Heil RGS303HDFA0AAAA gas furnace. On each call for heat the control board sends voltage to the igniter, which heats to a glowing temperature and ignites the gas at the burners. Igniters are a common wear item — they grow brittle from thermal cycling and eventually crack or fail to reach ignition temperature. A failed igniter is one of the most frequent causes of a furnace that clicks, draws, but never lights. Installing the correct OEM electrode restores dependable, fast light-off every cycle.

Specifications

Spec	Value
Part Number	1179966
Type	Hot Surface Igniter Electrode
Brand	ICP / Tempstar / Heil
Function	Burner ignition
Fit	OEM Replacement

Compatibility

Designed for the ICP / Tempstar / Heil RGS303HDFA0AAAA furnace and related RGS-series models that use the same hot surface ignition system. Match the part number and connector style to confirm fit.

Installation Guide

Safety First — Shut off gas and disconnect power at the switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position and wiring connector.
Remove — Unplug the igniter harness and remove the mounting screw. Handle only by the ceramic base — never touch the element.
Install — Mount the new igniter without touching the silicon-carbide element, then reconnect the harness.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace clicks and the inducer runs but burners never light.
Visible cracks or breaks in the igniter element.
Igniter glows weakly or not at all.
Intermittent no-heat calls that clear on a reset.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$46.80

Frequently Asked Questions

Does this Igniter fit my ICP RGS303HDFA0AAAA — OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS303HDFA0AAAA — OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS303HDFA0AAAA — OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu