What igniter fits my ICP furnace?

The correct replacement for ICP model RGS300LSAA0AAAA — OEM 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS300LSAA0AAAA — OEM 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS300LSAA0AAAA — OEM 1179966 | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS300LSAA0AAAA — OEM 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 41.60 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The OEM Ignitor Electrode (part number 1179966) is the hot surface igniter that lights the burners in your ICP Tempstar Heil RGS300LSAA0AAAA gas furnace. On each call for heat the control board sends voltage to the igniter, which glows red-hot to ignite the gas as it enters the burner. Igniters are fragile and consumable: the silicon-nitride/carbide element grows brittle with every heat cycle and eventually cracks, develops hairline fractures, or simply fails to reach ignition temperature. The classic symptom is a furnace that goes through its sequence — inducer runs, gas valve opens — but never lights, then locks out. Handling the element by its ceramic base only (never the glow tip) is essential, and this OEM electrode drops in for a quick, reliable repair.

Specifications

Spec	Value
Part Number	1179966
Description	Ignitor Electrode
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil / Comfortmaker)
Fits Model	RGS300LSAA0AAAA
Fitment	OEM Direct Replacement

Compatibility

This hot surface igniter electrode is built for the ICP Tempstar Heil RGS300LSAA0AAAA furnace and related RGS300-series gas furnaces using the same burner ignition system. Match the connector and bracket to your existing igniter before installing.

Installation Guide

Safety First — Disconnect power at the switch and breaker, then verify zero voltage with a multimeter; shut off the gas supply.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position and wiring before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and withdraw the old electrode, handling it only by the ceramic base.
Install — Seat the new igniter at the correct depth/angle, secure the screw, and reconnect the harness — never touch the glow element with bare fingers.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace cycles but burners never ignite
Igniter does not glow on a call for heat
Visible cracks or breaks in the ceramic element
Repeated ignition lockouts after the inducer runs

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$41.60

Frequently Asked Questions

Does this Igniter fit my ICP RGS300LSAA0AAAA — OEM 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS300LSAA0AAAA — OEM 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS300LSAA0AAAA — OEM 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu