What igniter fits my ICP furnace?

The correct replacement for ICP model RGS300LEAA0AAAA — OEM 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS300LEAA0AAAA — OEM 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS300LEAA0AAAA — OEM 1179966 | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS300LEAA0AAAA — OEM 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 38.94 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter electrode (part number 1179966) fits the ICP / Tempstar / Heil RGS300LEAA0AAAA gas furnace. The igniter glows red-hot on a heat call to light the burner gas. Igniters are brittle and have a finite lifespan — repeated thermal cycling, hairline cracks, silicon contamination from bare-hand contact, or a chipped element all cause ignition failure. When the igniter fails, the furnace produces no heat and frequently locks out after several failed ignition attempts. Installing the correct OEM igniter restores fast, reliable burner ignition.

Specifications

Spec	Value
Part Number	1179966
Description	Ignitor Electrode
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Fits Model	RGS300LEAA0AAAA
Fitment	Genuine OEM

Compatibility

Direct-fit replacement for the ICP / Tempstar / Heil RGS300LEAA0AAAA and other RGS300 family furnaces specifying OEM igniter 1179966. Verify the mounting bracket and connector style match your existing igniter before installing.

Installation Guide

Safety First — Shut off gas and disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring before disconnecting.
Remove — Unplug the igniter harness and unscrew the bracket. Handle the new igniter by the ceramic base only — never touch the element.
Install — Mount the new igniter, align it to the burner per the photo, and reconnect the harness.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burner lights within the normal trial period.

Signs You Need a Replacement

Furnace blows cold air — burner never lights
Igniter does not glow on a heat call
Visible cracks, chips, or breaks in the element
Furnace locks out after repeated failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$38.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS300LEAA0AAAA — OEM 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS300LEAA0AAAA — OEM 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS300LEAA0AAAA — OEM 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu