What igniter fits my ICP furnace?

The correct replacement for ICP model RGS244HEFA0AAAA — OEM 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS244HEFA0AAAA — OEM 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS244HEFA0AAAA — OEM 1179966 | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS244HEFA0AAAA — OEM 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 50.64 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM igniter electrode (part number 1179966) provides the ignition source for the ICP Tempstar Heil RGS244HEFA0AAAA gas furnace. On a call for heat, the control board energizes the igniter, which heats up and lights the gas at the burners. Igniters are brittle and degrade with every heating cycle, making them one of the most common no-heat failures. Typical symptoms are a furnace that goes through its sequence but never lights, a glowing element that produces no flame, repeated lockouts, or a cracked/broken igniter element. Installing the correct OEM electrode restores reliable, on-demand ignition.

Specifications

Spec	Value
Part Number	1179966
Type	Hot Surface Igniter Electrode
Brand	ICP / Tempstar / Heil
Supply Voltage	120V
Fits Model	RGS244HEFA0AAAA
Fitment	OEM direct replacement

Compatibility

Engineered for the ICP-family RGS244HEFA0AAAA sold under ICP, Tempstar, Heil, Comfortmaker, and Arcoaire. Verify the part number on your existing igniter matches 1179966 before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter before reaching into the burner area; never touch the ceramic element with bare fingers.
Access — Remove the burner-compartment service panel to reach the igniter.
Document — Photograph the igniter bracket position and wire routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw(s), then carefully withdraw the old electrode.
Install — Mount the new igniter without touching the element, align it to the burner per your photo, and reconnect the harness.
Test — Restore power, call for heat, and confirm the igniter glows and the burners light within the normal sequence.

Signs You Need a Replacement

Furnace runs its sequence but never lights (no-heat).
Igniter glows but the gas fails to ignite, then locks out.
Visible cracks, breaks, or white blistering on the ceramic element.
Repeated ignition lockouts requiring power resets to clear.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS244HEFA0AAAA — OEM 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS244HEFA0AAAA — OEM 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS244HEFA0AAAA — OEM 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu