What igniter fits my ICP furnace?

The correct replacement for ICP model RGS240SSFA0AAAA | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS240SSFA0AAAA | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS240SSFA0AAAA | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS240SSFA0AAAA | Ships Today
Brand: ICP
SKU: 1179966
Price: 45.44 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM igniter electrode (OEM part number 1179966) for the ICP/Heil/Tempstar RGS240SSFA0AAAA gas furnace. The igniter is energized at the start of each heating cycle, glowing red-hot to ignite the gas at the burners. Because it is repeatedly heated and cooled, the igniter element is a high-wear component and one of the most common no-heat failures. A cracked, eroded, or open igniter element prevents ignition, leaving the furnace to lock out after several failed trials. Replacing the igniter restores reliable, on-demand ignition and is a routine part of furnace maintenance.

Specifications

Spec	Value
OEM Part Number	1179966
Type	Hot Surface Igniter / Electrode
Brand	ICP / Heil / Tempstar
Application	Gas Furnace Ignition
Fits Model	RGS240SSFA0AAAA

Compatibility

Designed as a direct OEM replacement for the ICP RGS240SSFA0AAAA and the broader Heil, Tempstar, and Comfortmaker RGS-series gas furnaces that use this igniter electrode. Verify the connector style and mounting bracket against your original before installing.

Installation Guide

Safety First — Shut off gas and disconnect power; verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring before removing.
Remove — Unplug the igniter harness and remove the mounting screw; handle the element only by its ceramic base, never the silicon-carbide tip.
Install — Mount the new igniter, keeping fingers off the element, and reconnect the harness per your photo.
Test — Restore gas and power and confirm the igniter glows and lights the burners.

Signs You Need a Replacement

Furnace blower runs but no heat is produced
Igniter does not glow during the ignition sequence
Visible cracks or erosion on the igniter element
Furnace locks out after repeated failed ignition trials

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS240SSFA0AAAA | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS240SSFA0AAAA | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS240SSFA0AAAA | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu