What igniter fits my ICP furnace?

The correct replacement for ICP model RGS240LTEA0AAAA — OEM 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS240LTEA0AAAA — OEM 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS240LTEA0AAAA — OEM 1179966 | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS240LTEA0AAAA — OEM 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 37.64 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The ICP igniter electrode (OEM part 1179966) lights the burners on your RGS240LTEA0AAAA gas furnace. Each time the thermostat calls for heat, the furnace control energizes this igniter to reach ignition temperature and light the gas at the burner. Repeated heating cycles slowly degrade the igniter element through thermal stress and oxidation until it cracks or can no longer reach temperature. The result is a furnace that attempts ignition several times and then locks out, leaving the home with no heat. Installing the exact OEM igniter electrode restores fast, dependable ignition every cycle.

Specifications

Spec	Value
Part Number	1179966
Description	Igniter Electrode
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil / Comfortmaker)
Fits Model	RGS240LTEA0AAAA
Fitment	OEM Direct Replacement
Application	Gas Furnace Ignition

Compatibility

This igniter electrode is the OEM-direct replacement for the ICP RGS240LTEA0AAAA gas furnace and the Tempstar, Heil, and Comfortmaker models sharing ICP part 1179966. Confirm your furnace model and existing igniter part number before ordering to ensure exact fitment.

Installation Guide

Safety First — Shut off the gas supply and disconnect power at the furnace switch or breaker. Verify zero voltage with a multimeter before touching any wiring.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter position and wire routing before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw(s), and withdraw the old igniter. Handle the new part only by its ceramic base — never touch the element.
Install — Mount the new igniter in the original position, secure the screw(s), and reconnect the harness per your photo.
Test — Restore gas and power, run a heat cycle, and confirm the burners light promptly and stay lit.

Signs You Need a Replacement

Furnace attempts ignition repeatedly then locks out with no heat
Visible cracks, chips, or hot spots on the igniter element
No glow or spark during the ignition sequence
Intermittent ignition that sometimes fails to light

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$37.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS240LTEA0AAAA — OEM 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS240LTEA0AAAA — OEM 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS240LTEA0AAAA — OEM 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu