What igniter fits my ICP furnace?

The correct replacement for ICP model RGS214LTAA0AAAA | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS214LTAA0AAAA | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS214LTAA0AAAA | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS214LTAA0AAAA | Ships Today
Brand: ICP
SKU: 1179966
Price: 38.94 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM igniter electrode (part #1179966) is the hot surface ignition component for the ICP/Tempstar/Heil RGS214LTAA0AAAA gas furnace. On each heat call the furnace control board sends voltage to the igniter, which glows red-hot and lights the burner gas. The igniter is a wear item — its silicon carbide or silicon nitride element grows brittle with every thermal cycle and eventually cracks or fails to reach ignition temperature. When it goes, the furnace will not light. Common symptoms are no heat with the blower still cycling, a furnace that locks out after several failed ignition attempts, or a visibly cracked igniter element. This is a high-frequency replacement part during heating season.

Specifications

Spec	Value
Part Number	1179966
Type	Hot Surface Igniter / Electrode
Brand	ICP
Application	Gas Furnace Ignition

Compatibility

Direct OEM replacement for the ICP/Tempstar/Heil RGS214LTAA0AAAA gas furnace and related models in the same family using this ignition system. Match the mounting bracket and connector to your existing igniter before installing.

Installation Guide

Safety First — Shut off gas and disconnect power to the furnace, then verify zero voltage at the igniter connector with a multimeter.
Access — Remove the furnace burner compartment service panel.
Document — Photograph the igniter orientation, bracket position, and wiring connector before removal.
Remove — Unplug the connector and remove the mounting screw. Handle by the ceramic base only — never touch the fragile element.
Install — Mount the new igniter in the same position and reconnect the connector, keeping the element clear of the burner.
Test — Restore gas and power, then run a heat call and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

No heat while the blower and draft inducer still run
Furnace locks out after repeated failed ignition attempts
Igniter does not glow on a heat call
Visible cracks, chips, or white burn spots on the element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$38.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS214LTAA0AAAA | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS214LTAA0AAAA | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS214LTAA0AAAA | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu