What igniter fits my ICP furnace?

The correct replacement for ICP model RGS213SREA0AAAA — Furnace Ignition | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS213SREA0AAAA — Furnace Ignition | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS213SREA0AAAA — Furnace Ignition | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS213SREA0AAAA — Furnace Ignition | Ships Today
Brand: ICP
SKU: 1179966
Price: 37.64 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM igniter electrode (OEM part #1179966) is the ignition component for the ICP/Tempstar/Heil RGS213SREA0AAAA gas furnace. On each heating call the igniter heats up to light the burner gas, making it one of the most safety-critical and most frequently replaced parts in a furnace. Igniters are brittle and degrade with every thermal cycle. Common failure symptoms include a furnace that clicks and runs the inducer but never lights, a visible crack in the igniter element, no glow during the ignition sequence, or a unit that locks out after several failed ignition attempts. Installing a fresh OEM igniter restores reliable, on-demand heat.

Specifications

Spec	Value
OEM Part Number	1179966
Type	Igniter Electrode (Hot Surface)
Brand	ICP / Tempstar / Heil
Function	Burner Ignition
Fits Model	RGS213SREA0AAAA

Compatibility

Built for the ICP/Tempstar/Heil/Comfortmaker RGS213SREA0AAAA gas furnace and related RGS-series models. Confirm the igniter's mounting bracket and connector match your existing part before installing.

Installation Guide

Safety First — Shut off gas and disconnect power, then verify zero voltage with a multimeter.
Access — Remove the furnace burner compartment service panel.
Document — Photograph the igniter position and wiring before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw; handle the old igniter by the bracket only.
Install — Mount the new igniter by its bracket without touching the element, then reconnect the plug.
Test — Restore gas and power, then watch a full ignition cycle to confirm a clean light-off.

Signs You Need a Replacement

Furnace runs the inducer but burners never light
No glow visible during the ignition sequence
Visible crack or break in the igniter element
Repeated ignition lockouts on the control board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$37.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS213SREA0AAAA — Furnace Ignition | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS213SREA0AAAA — Furnace Ignition | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS213SREA0AAAA — Furnace Ignition | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu