What igniter fits my ICP furnace?

The correct replacement for ICP model RGS213LECA0AAAA — OEM 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS213LECA0AAAA — OEM 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS213LECA0AAAA — OEM 1179966 | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS213LECA0AAAA — OEM 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 46.80 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter electrode (part 1179966) fits the ICP / Tempstar / Heil RGS213LECA0AAAA gas furnace. The hot surface igniter is the component that glows red-hot when the control board energizes it, lighting the gas at the burners during each heating cycle. Igniters are brittle and wear out from repeated thermal cycling — they crack, develop hairline fractures, or simply burn out and lose continuity. A failed igniter is one of the most common no-heat causes: the inducer and gas valve sequence correctly but the burners never light, and the furnace locks out. Replacing it with the correct OEM electrode restores dependable ignition.

Specifications

Spec	Value
Part Number	1179966
Description	Ignitor Electrode
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Fits Model	RGS213LECA0AAAA
Fitment	OEM Direct Replacement

Compatibility

Designed for the ICP-family RGS213LECA0AAAA and equivalent Tempstar, Heil, and Comfortmaker gas furnaces. Match the mounting bracket and connector against your original igniter before installing — and handle the silicon-carbide element only by its base.

Installation Guide

Safety First — Disconnect power and shut off the gas supply, then verify zero voltage with a multimeter.
Access — Remove the furnace burner compartment door.
Document — Photograph the igniter position, bracket, and wire routing before removal.
Remove — Unplug the igniter connector and remove the mounting screw, lifting out the old element without touching the new igniter's surface.
Install — Mount the new 1179966 igniter in the exact original position and reconnect the lead.
Test — Restore gas and power, then watch a full cycle to confirm the igniter glows and the burners light.

Signs You Need a Replacement

Igniter does not glow on a heat call
Visible cracks or breaks in the element
Furnace locks out with no burner flame
No continuity when tested with a multimeter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$46.80

Frequently Asked Questions

Does this Igniter fit my ICP RGS213LECA0AAAA — OEM 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS213LECA0AAAA — OEM 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS213LECA0AAAA — OEM 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu