What igniter fits my ICP furnace?

The correct replacement for ICP model RGS213HECA0AAAA – OEM 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS213HECA0AAAA – OEM 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS213HECA0AAAA – OEM 1179966 | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS213HECA0AAAA – OEM 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 37.64 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM igniter electrode, ICP part number 1179966, used to ignite the burners on ICP-family gas furnaces. On a call for heat the igniter heats up and lights the gas at the burner. Igniters are brittle and degrade over thousands of heating cycles — a cracked, eroded, or open igniter is one of the most common causes of a furnace that ignites the inducer and gas valve but never lights, then locks out. Replacing a worn igniter restores fast, reliable ignition and clears intermittent no-heat lockouts.

Specifications

Spec	Value
Part Number	1179966
Type	Igniter Electrode (Hot Surface)
Brand	ICP / Tempstar / Heil
Application	Gas furnace burner ignition

Compatibility

Designed for the ICP Tempstar Heil RGS213HECA0AAAA and related ICP-family gas furnaces using this igniter electrode. Match the part number and mounting bracket to your original before ordering.

Installation Guide

Safety First – Disconnect power and shut off the gas; verify zero voltage with a multimeter.
Access – Remove the burner compartment panel.
Document – Photograph the igniter position and wiring.
Remove – Unscrew the igniter bracket and unplug the lead; handle the new igniter by the bracket only — never touch the element.
Install – Mount the new igniter, confirm proper gap/position over the burner, and reconnect the lead.
Test – Restore power and gas, then verify ignition on a call for heat.

Signs You Need a Replacement

Furnace locks out with no flame after the ignition sequence
Visible cracks or erosion on the igniter element
No glow during the heat call
Open circuit when measuring igniter resistance

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$37.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS213HECA0AAAA – OEM 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS213HECA0AAAA – OEM 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS213HECA0AAAA – OEM 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu