What igniter fits my ICP furnace?

The correct replacement for ICP model RGS210LTAA0AAAA — OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS210LTAA0AAAA — OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS210LTAA0AAAA — OEM | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS210LTAA0AAAA — OEM | Ships Today
Brand: ICP
SKU: 1179966
Price: 42.84 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM igniter electrode (part number 1179966) for the ICP/Tempstar/Heil RGS210LTAA0AAAA. The igniter is the component that produces the ignition source to light the main burners at the start of every heating cycle. When the thermostat calls for heat, the control board energizes the igniter; once it reaches operating condition, the gas valve opens and the burners light. Because the igniter is stressed by thermal cycling on every call for heat, it is a common wear item. A cracked, eroded, or open igniter is one of the most frequent causes of no-heat calls. Replacing it with the correct OEM electrode restores reliable, on-demand ignition.

Specifications

Spec	Value
Part Number	1179966
Type	Igniter Electrode
Brand	ICP / Tempstar / Heil
Function	Burner Ignition
Fits Model	RGS210LTAA0AAAA

Compatibility

Designed as a direct-fit replacement for the ICP/Tempstar/Heil RGS210LTAA0AAAA and shared across comparable ICP-family units that use this ignition assembly. Confirm the mounting bracket and connector match your existing igniter before installing.

Installation Guide

Safety First — Shut off gas and electrical power, then verify zero voltage at the igniter leads with a multimeter.
Access — Remove the furnace burner/service panel to reach the ignition assembly.
Document — Photograph the igniter position, gap, and wiring before removal.
Remove — Disconnect the igniter lead and remove the mounting screw(s), being careful not to touch the fragile element.
Install — Mount the new igniter in the same orientation and reconnect the lead, handling the element only by its base.
Test — Restore gas and power, call for heat, and confirm the igniter energizes and the burners light cleanly.

Signs You Need a Replacement

Furnace will not light and there is no heat on a call.
Igniter shows visible cracks, blistering, or erosion.
Igniter glows but burners fail to ignite, or it never glows at all.
Repeated ignition lockouts on the control board.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS210LTAA0AAAA — OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS210LTAA0AAAA — OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS210LTAA0AAAA — OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu