What igniter fits my ICP furnace?

The correct replacement for ICP model RGS210HSAA0AAAA | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS210HSAA0AAAA | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS210HSAA0AAAA | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS210HSAA0AAAA | Ships Today
Brand: ICP
SKU: 1179966
Price: 41.54 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM ICP igniter electrode (part 1179966) for the ICP Tempstar Heil RGS210HSAA0AAAA gas furnace. The igniter is the component that heats up and lights the burner gas at the start of every heating cycle. When the control board calls for heat, voltage is sent to the igniter, which glows hot and ignites the gas as the valve opens. Igniters are brittle and degrade with every cycle — the element develops hairline cracks, hot spots, and eventually breaks, leaving the furnace unable to light. A cracked or open igniter is one of the most common no-heat failures and is a normal wear item that should be handled carefully, never touched on the element with bare fingers, as skin oils shorten its life.

Specifications

Spec	Value
Part Number	1179966
Type	Hot Surface Igniter / Ignitor Electrode
Brand	ICP / Tempstar / Heil
Application	Gas Furnace Burner Ignition
Fit	OEM Direct Replacement

Compatibility

Direct OEM fit for the ICP Tempstar Heil RGS210HSAA0AAAA. The 1179966 igniter electrode is used across many ICP-family (Tempstar, Heil, Comfortmaker) gas furnaces — confirm the part number and mounting bracket against your original before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker. Verify zero voltage with a multimeter and shut off the gas.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring before removal.
Remove — Unplug the igniter connector and unscrew the igniter from the burner assembly. Handle by the ceramic base only.
Install — Mount the new igniter, never touching the element, and reconnect the plug per your photo.
Test — Restore power and gas, start a heat cycle, and confirm the igniter glows and lights the burners.

Signs You Need a Replacement

Furnace will not light — no glow from the igniter on a call for heat
Visible cracks, breaks, or white spots on the element
Igniter glows but burners fail to ignite consistently
Open circuit / no resistance reading across the igniter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$41.54

Frequently Asked Questions

Does this Igniter fit my ICP RGS210HSAA0AAAA | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS210HSAA0AAAA | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS210HSAA0AAAA | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu