What igniter fits my ICP furnace?

The correct replacement for ICP model RGS210HDAA0AAAA — OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS210HDAA0AAAA — OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter Electrode for RGS210HDAA0AAAA — OEM | Ships Today

Name: ICP Hot Surface Igniter Electrode for RGS210HDAA0AAAA — OEM | Ships Today
Brand: ICP
SKU: 1179966
Price: 37.64 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM igniter electrode (OEM part 1179966) for the ICP/Tempstar/Heil RGS210HDAA0AAAA gas furnace. On each heating call the furnace control energizes the igniter, which heats up and lights the burners. The electrode is a brittle ceramic-and-element assembly that degrades with every ignition cycle. When it fails you typically get no heat, the blower running with cold air, or the furnace cycling and locking out after several failed ignition attempts. Replacing the igniter is one of the most common no-heat repairs.

Specifications

Spec	Value
OEM Part Number	1179966
Type	Igniter Electrode / Hot Surface Ignitor
Brand	ICP / Tempstar / Heil
Application	Gas Furnace Ignition
Fitment	OEM Direct Replacement

Compatibility

Direct OEM fit for the ICP/Tempstar/Heil RGS210HDAA0AAAA and related ICP-family furnaces using the same ignition assembly. Match the connector and mounting bracket to your existing igniter before installing.

Installation Guide

Safety First — Shut off gas and disconnect power at the furnace switch, then verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter's position, bracket, and wire routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw(s). Handle by the bracket only — never touch the ceramic element.
Install — Mount the new igniter, keeping fingers off the element, and reconnect per your photo.
Test — Restore gas and power, call for heat, and confirm the igniter glows and lights the burners.

Signs You Need a Replacement

No heat — blower runs but burners never light
Furnace locks out after repeated failed ignition attempts
Igniter shows cracks or no longer glows orange
Visible breaks or hot spots on the ceramic element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter Electrod...

$37.64

Frequently Asked Questions

Does this Igniter fit my ICP RGS210HDAA0AAAA — OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS210HDAA0AAAA — OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS210HDAA0AAAA — OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu