ICP Gas Valve Support Bracket for RGS150LTAA0AGAA — OEM Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) fits the ICP Tempstar Heil RGS150LTAA0AGAA gas furnace. The bracket secures the gas valve assembly to the burner manifold area, holding it in proper alignment and preventing strain on the gas line connections and electrical terminals. A loose, bent, or corroded support bracket can let the gas valve shift, stressing the pipe threads and creating the potential for gas leaks or misaligned burner ignition. Installing the correct OEM bracket restores a rigid, properly positioned mount for the valve so the manifold pressure and burner alignment stay within spec.

Specifications

Compatibility

Designed for the ICP Tempstar Heil RGS150LTAA0AGAA furnace and related RGS-series gas furnaces using the same gas valve mounting configuration. Verify the bracket footprint and screw pattern against your existing part before ordering.

Installation Guide

1. Safety First — Disconnect electrical power and shut off the gas supply at the manual shutoff valve; verify zero voltage with a multimeter.
2. Access — Remove the furnace front/service panel to reach the gas valve and manifold.
3. Document — Photograph the gas valve, bracket position, and all wiring before disconnecting.
4. Remove — Support the gas valve, then unbolt the old bracket from the manifold/chassis.
5. Install — Mount the new bracket, reattach the gas valve, and reconnect wiring per your photo.
6. Test — Restore gas and power, leak-check all joints with soap solution, and verify proper burner ignition.

Signs You Need a Replacement

• Gas valve shifting or sagging out of alignment
• Bent, cracked, or corroded mounting bracket
• Strain or stress visible on the gas line connections
• Rattling or vibration of the valve assembly during operation

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.