ICP Gas Valve Support Bracket for RGS150LFBA0AGAA — OEM Part 1178238 | Ships Today

Overview

The ICP Gas Valve Support Bracket (OEM part 1178238) is the mounting bracket that secures the gas valve to the burner/manifold assembly in the ICP / Tempstar / Heil RGS150LFBA0AGAA furnace. This bracket holds the valve in the correct position and orientation so the manifold and burner alignment stays true and the valve is not stressed by the weight of attached piping. A bent, corroded, or missing bracket can let the gas valve shift, strain the gas line connections, or cause vibration noise during operation. Replacing a damaged bracket with the correct OEM part restores proper valve support and safe alignment.

Specifications

Compatibility

This bracket is a direct OEM replacement for the ICP / Tempstar / Heil RGS150LFBA0AGAA and related RGS150 series gas furnaces that use support bracket 1178238. Verify your bracket part number and gas-valve mounting pattern before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the gas valve, bracket, and piping orientation before removal.
4. Remove — Disconnect the gas line and valve wiring as needed, unbolt the old bracket, and remove it.
5. Install — Fasten the new 1178238 bracket, remount the gas valve, and reconnect piping using fresh pipe sealant rated for gas.
6. Test — Restore gas and power, leak-check all joints with soap solution, and confirm a clean ignition cycle.

Signs You Need a Replacement

• Gas valve loose or sagging on the manifold
• Bent, cracked, or corroded bracket
• Vibration or rattle from the gas valve during firing
• Strain visible on the gas line connections

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.