ICP Gas Valve Support Bracket for RGS150LDCB0AAAA — OEM Mounting Bracket | Ships Today

Overview

This OEM gas valve support bracket (part 1178238) mounts and stabilizes the gas valve and manifold assembly in the ICP/Heil/Tempstar RGS150LDCB0AAAA furnace. The bracket holds the valve in correct alignment with the burner manifold so the gas orifices stay seated and the valve body is not stressed by the gas line. A bent, corroded, or missing bracket allows the valve to shift, which can misalign burners, strain the inlet piping, and create a potential gas-tightness concern. This is the exact replacement part used during gas valve service or manifold repair.

Specifications

Compatibility

Direct-fit support bracket for the gas valve assembly in the ICP/Heil/Tempstar/Comfortmaker RGS150LDCB0AAAA furnace. Confirm your model number on the rating plate before ordering.

Installation Guide

1. Safety First — Disconnect power at the furnace switch and breaker and shut off the gas supply. Verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the bracket position and gas valve orientation before disconnecting.
4. Remove — Disconnect the gas line union and valve wiring as needed, remove the fasteners, and free the old bracket.
5. Install — Mount the new bracket, reattach the gas valve in its original alignment, and reconnect the manifold per your photo.
6. Test — Restore gas and power, leak-check all gas joints with soap solution, and run a heat cycle to verify clean burner ignition.

Signs You Need a Replacement

• Loose or shifting gas valve / manifold
• Bent, cracked, or heavily corroded bracket
• Misaligned burners or strained gas piping
• Found damaged during gas valve replacement

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.