ICP Gas Valve Support Bracket for RGS150LDAB0AGAA — OEM Fit | Ships Today

Overview

This genuine OEM gas valve support bracket (1178238) for the ICP/Tempstar/Heil RGS150LDAB0AGAA furnace rigidly mounts the gas valve to the burner assembly, holding it in correct alignment with the manifold and burners. A secure bracket prevents stress on the gas line and manifold threads, keeps the valve from vibrating loose, and ensures the burners fire evenly. A bent, corroded, or missing bracket can let the valve sag, strain the gas connection, and create the conditions for a leak or misaligned flame. Replacing a damaged bracket is essential any time the gas valve is serviced or replaced.

Specifications

Compatibility

Designed for the ICP/Tempstar/Heil RGS150LDAB0AGAA gas furnace and related International Comfort Products models that use this bracket to support the manifold-mounted gas valve. Verify your burner/manifold configuration before ordering.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment service panel.
3. Document — Photograph the bracket orientation, gas line routing, and valve position before disturbing anything.
4. Remove — Disconnect the gas line union and valve wiring as needed, then unbolt the old bracket from the manifold/cabinet.
5. Install — Fasten the new bracket, remount the gas valve, and reconnect the gas line; apply approved pipe sealant to threads.
6. Test — Restore gas and power, leak-check all joints with soap solution, and verify a clean, even burner flame.

Signs You Need a Replacement

• Gas valve sags or moves under hand pressure
• Bent, cracked, or corroded mounting bracket
• Strain visible on the gas line or manifold connection
• Burner flame uneven after valve service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.